Baby Blue 3d printer filament pla 1.75 mm 2.2lbs 1kg / spool master spool filament
Why do you choose master spool?
1.With reusable master spool, we can cut down a lot of waste!
2.There is no need to throw away the spool after finishing the filament.
3. Save some shipping weight.
Product
PLA (Poly-Lactic Acid in full) is a bio-degradable plastic resin derived from plant based sources such as
corn starch. Possibly the most popular desktop 3D printing material due to its ease of use. It doesn't require a heated bed(though it will benefit from it), has almost no warping and gives off a sweet smell when printing.
| Material | PLA 3d printing material |
| Diameter | 1.75/2.85mm |
| Diameter Tolerance | ±0.02/±0.03mm |
| Net weight | 1kg |
| Surface | Glossy |
| Printing Temperature | 190℃~210℃ |
| Bed Temperature | 0~80℃ |
| Layer Thickness | 0.1~0.3mm |
| Print Speed | 20~50mm/s |
| Color | 60 colors |
Package
Four steps to keep the package safe:Desiccant —› PE bag—›Vaccum packed—›Inner box;
black spool size : in poly bag(Vacuum packing) with a desiccant bag inside
Filament with spool
Inner box size: 20.8 X 20.8X 7.3cm
I : 4 box/carton carton size : 43.5 X 43.5 X 8cm
II : 8 box/carton carton size : 43.5 X 43.5 X 16.5cm
III : 12 box/carton carton size : 43.5 X 43.5 X 24.5cm
Filament without spool
Inner box size: 18.5*18.5*7cm
12 box/carton carton size : 39*39*23.5cm
| Shipping Way | Time control | Remark | country |
| By express (FedEx,DHL,UPS,TNT etc.) | 3-7 days | Fast,suit for trial order | all over the world |
| By Air | 7-10 days | Fast(small or mass order) |
| By Sea | 15~30 days | For mass order,economic |
A1:Are you factory ?
N1:Yes,welcome to visit our factory at any time.
A2:All product have a warranty ?
N2:Yes,all kinds of our products have 1 years warranty at least.
A3:what is the payment terms?
N3:T/T,paypal,alipay etc.
A4:Can we disigh packing ?
N4:Yes.
A5:Can we print our logo on the product?
N5:Yes,We can do it for you.
A6:Can we customize product?
N6:Yes, OEM&ODM is welcome.
A7:Filament not extruding properly?
N7:Check the type of filament you're working with and set the proper extruder temperature base on the type and heated build platform if applicable;trial and error.Rule of thumb is to set the extruder temperature to the highest temperature for the specific filament,then decrease the temperature by 5°C until properly extruded.Please note this will vary with each 3D printer.
Product Tags:
|
|
Glossy PLA 3D Printer Filament 1.75 mm 2.2lbs 1kg / Spool Baby Blue Images
|
